커피 추출 액세서리

A valved cap that replaces the AeroPress stock cap to stop dripping, hold water for longer steeps, or build back-pressure for espresso-style shots. Common models: AeroPress Flow Control Filter Cap, Fellow Prismo, Joe Presso (for a true espresso shot, the Prismo’s pressure valve).

추천 AeroPress Flow Control Filter Cap · Fellow Prismo · Joe Presso

DragonFly's separate switch base for its conical drippers, the CT62 and the SA62. A knob holds the water in the dripper for immersion or releases it to drain; the base comes apart in two magnetic pieces for washing. Sold apart from the SA62, which on its own has no valve; the flat Tri-Spin base does not fit it.

추천 DragonFly Conical Dripper Transit Base

DragonFly's separate switch base for the Tri-Spin FS flat-bottom dripper. A knob (O open / X close) holds water in the dripper for immersion or releases it for drawdown. Sold apart from the dripper, which on its own has no valve.

추천 DragonFly Tri-Spin FS Flat Transit Base

The Hario Switch's valved base, used underneath other drippers (Hario V60 NEO, Sibarist UFO) to add stop-and-go immersion. Here it is required as an add-on base, not as the standalone brewer.

추천 Hario Switch

Mazelab의 별매 스위치 베이스 「Solo Spin」. 열고 닫는 밸브를 더해 침지 단계를 가능하게 합니다. 오리지널 Solo와 더 큰 Solo Tritan 양쪽에 맞습니다. 별매이며, 각 드리퍼 단독으로는 밸브 없는 빠른 흐름의 브루어입니다.

추천 Mazelab Solo Spin

A food-safe silicone flow regulator that drops into the open base of OREA O1/O2 (and older open-bottom) brewers. The #2 (dark grey) is the slowest: it caps the maximum flow rate to enforce a longer minimum contact time, so you can grind coarser and still hit your brew time.

추천 OREA #2 Regulator

A food-safe silicone flow regulator for the open base of OREA O1/O2 (and older open-bottom) brewers. The #4 (black) is the medium setting: its capped flow rate sits between the #2 and #8, adding contact time without going as slow as the #2.

추천 OREA #4 Regulator

A food-safe silicone flow regulator for the open base of OREA O1/O2 (and older open-bottom) brewers. The #8 (orange) is the fastest of the set. It also fits a Hario Switch base, turning a flat-bottom brewer into a stop-and-go immersion setup with a quick drawdown once you release the valve.

추천 OREA #8 Switch Regulator

A reusable chilling sphere rested on the slurry to drop the brew temperature during extraction (flash-style cooling).

추천 Paragon Cold Brew Sphere

A frother, steam wand, or whisk to aerate and foam liquids — milk for milk drinks, or egg yolk and cream toppings (Vietnamese egg / salt coffee).

V60이나 Kalita Wave 같은 별도 드리퍼 위에 올리는 중력식 물 분배기입니다. 주전자의 물줄기를 부드러운 물방울로 나눠 줍니다. 드리퍼와 종이 필터는 따로 필요합니다.

추천 Gabi Master B

The Kruve Sifter is a set of stackable sieves that sort ground coffee by particle size. Sifting out the finest fines and the largest boulders narrows the grind distribution, so more of the bed extracts at the same rate — a cleaner, more even, more repeatable cup. Kruve is the best-known coffee sifter, with interchangeable screens across a range of micron sizes.

추천 Kruve Sifter

A handheld dispersion screen you pour onto; it softens the water stream so it does not agitate or bore into the coffee bed.

추천 Melodrip

V60 같은 원뿔형 드리퍼 바닥에 놓아 평평한 바닥을 만들어 주는 Nana Coffee의 스테인리스 인서트입니다. 웨이브 필터를 끼워 평평한 베드로 추출할 수 있습니다.

추천 Nana Coffee Nebula

A moulding tool that seats a flat paper filter tightly against the walls of OREA's narrow flat-bottom brewers (V2, V3, V4 Narrow, O1, and the glass/porcelain models), so the paper hugs the walls and forms a low-bypass bed — forcing water through the coffee instead of around it, for higher and more consistent extraction. You press it in to shape the paper, then pull it out before drawdown; it does not restrict flow. Pair with OREA flat paper.

추천 OREA Neo Negotiator

A cluster of fine needles used to stir and de-clump the coffee bed (Weiss Distribution Technique) for even saturation.